 |
|||||
|
Home :: About Us :: Director Profile :: Products :: Services :: Join Us :: Feedback form |
|
||||
|
|||||
CycloPac® C The CycloPac® C is a heavy duty centrifugal cleaner designed to separate high and average low specific weight particles of different sizes, weights and shapes from the pulp slurry, and performs this duty at various flows and consistencies. Stock enters the CycloPac® C tangentially through a special top inlet head and follows a downward spiral path near the conical inner wall. Due to accelerated centrifugal force action along the wall contour, low specific gravity material goes upward to the top outlet vortex finder while the high specific gravity material flows continuously to the reject vat. |
|
||||
|
|||||
|
|
|
||||
|
The CycloPac® C main features are:
Connect the discharge pipe-work.
It is essential that all piping be well supported so that no strain
is placed on the CycloPac. Consideration should be given to providing
loose flanges on pipes that bolt onto the CycloPac. These loose flanges
may be welded to the pipe after the holes are seen to match. Use ¼"
(6 mm) rubber jointing. Before Start-up Set CycloPac® C Inlet, Outlet and Re-circulation valves at ½ opening. Normal Start-up Sequence a.) Start the feed pump. b.) Balance Inlet, Outlet and Re-circulation valves to have Accept Outlet pressure of 2 ~ 2.5 bars. c.) Check
the operating consistency
|
|
||||
|
|
|
||||
|
Copyright
© 2003 H. T. Engineering works |
|
||||
Heavy duty construction