Home :: About Us :: Director Profile :: Products :: Services :: Join Us :: Feedback form

The drive of RagPac® is attached to the main vertical support to minimize space required and easy installation.

OPERATION

Before Start-up

Check the RagPac® bearings, bearing housings for proper lubrication.


Check for correct motor rotation.

First Time Start-up

a. Start the RagPac® drive motor.

Normal Start-up Sequence


a. Start the RagPac® motor.

General

Proper maintenance practice will promote trouble-free operation and ensure better machine performance.

Care should be exercised during disassembly to place removed parts in clean, dry and protected locations. If machine is to be left disassembled for a period of time, openings should be protected to prevent entrance of foreign materials.

During re-assembly, all new replaced parts should be checked carefully prior to installation to ensure that they are proper for that particular location. Use proper tools and equipment to facilitate performance of fine quality work.

Bearing

Supplied bearings require lubrication at regular intervals. The bearings are enclosed inside flange bearing housings bolted at the side of the main support.


Drive Side Bearing Replacement

Loosen the tension of the sprocket chain and remove the chain.
Remove the driven sprocket.
Remove bolts holding the bearing housing cover against the bearing housing.
Remove housing cover.
Remove the lock nut, lock washer and adapter sleeve.
Remove the bearing.
Replace with new bearing.

TOP